National Service Hotline:400-7362-588   

搜索
Search
Confirm
Cancel

PRODUCTS

All categories

Find products quickly

Welcome to consult now

Telephone consultation:

SDQ series water resistance soft starter

01

01

  • 详细描述
  • 原理及特性
  • 型号定义及选型说明
  • 技术参数
  • 一次方案
  •   SDQ series water resistance soft starter is mainly suitable for the soft starter of winding asynchronous motor with three-phase AC 50Hz, rated working voltage of 380V, 3KV, 6KV, 10KV, and rated power of 75KW or more.

      The water resistance is connected in series with the motor's rotor circuit, and the motor starting current is changed by adjusting the rotor resistance. It can be widely used in the starting of ball mills, rolling mills, crushers, hoists, fans, pumps and other motors in building materials, metallurgy, mining, petrochemical, water conservancy and other industries. Especially suitable for industrial and mining enterprises with insufficient grid capacity.

    1

    •   This device connects a special water resistor in series in the rotor circuit of a wound motor, and uses a mechanical transmission device to uniformly change the distance between the two pole plates in the resistor liquid, so that the resistance value is steplessly reduced from large to zero, so that the motor Accelerate uniformly, start smoothly to the rated speed, and finally cut off to complete the starting process.

        SDQ-A series water resistance starting cabinet is connected in series in the motor's rotor circuit, and the rotor resistance is changed to start. After the rotor circuit increases the appropriate resistance value, on the one hand, the starting current is reduced, which can be controlled below 1.2Ie. On the other hand, the water resistance in the rotor circuit can increase the starting torque, improve the motor's dragging ability, thereby shorten the starting time and reduce the heating of the motor.

        The starting current of this device is small (Iq≤1.5Ie), the starting success rate is high, the starting is stable, there is no impact, the operation is reliable, the operation is convenient, and the space is small.

    • 1

    •   Environmental conditions for use:

        Ambient temperature: generally 0-45℃; with heating device: -20-45℃;

        The altitude does not exceed 2000m; The relative humidity of the air is not more than 85% (temperature 25℃);

        In places where there is no explosive mixture of gas;

        where there is no significant shaking and shock vibration;

        The installation inclination with the horizontal plane does not exceed 5°;

        in an environment where there is no gas or steam that destroys the insulation;

        A place where dripping water can be prevented indoors;

        Air pollution level 3;

        Working conditions:

        Installation category (overvoltage category): SDQ-A series Ⅱ; SDQ-B series, SDQ-R series Ⅲ;

        Use category: SDQ-A series AC-2; SDQ-B series, SDQR series AC-3;

        Control power supply Us: AC 380V three-phase four-wire 50/60Hz (VV-1000 4*2.5mm2);

        Allow starting resistance fluid temperature: 0-70℃;

        Allowable starting resistance liquid level range: the highest liquid level is 8cm away from the upper edge of the water tank, and the lowest liquid level is 16cm away from the upper edge of the water tank;

        Executive standards

        low-voltage switchgear and control equipment GB/T14048.1-2006; IEC947-1: 1988; GB 7251.1-2005; IEC439-1: 1992 water resistance starter Q/XDY02-2007

        Home | About

    • 1

 GBRQ series frequency conversion soft starter
GBRQ series frequency conversion soft starter
The company introduces and digests the power electronic technology of Emerson Company of the United States, and develops and produces the GBRQ series of high-voltage variable frequency soft starters.
 GSDQ water resistance soft starter series
GSDQ water resistance soft starter series
GSDQ series water resistance soft starters are mainly suitable for starting and protecting devices of three-phase induction squirrel cage asynchronous and synchronous motors with rated working voltages of 3, 6, and 10KV and power range of 200-30000KW.
 GZDW DC screen
GZDW DC screen
DC screen is the abbreviation of GZDW intelligent electric power operation power system, which is composed of charging screen and battery screen.
 SDQ series water resistance soft starter
SDQ series water resistance soft starter
SDQ series water resistance soft starter is mainly suitable for the soft starter of winding asynchronous motor with three-phase AC 50Hz, rated working voltage of 380V, 3KV, 6KV, 10KV, and rated power of 75KW or more.
 GDCQ electromagnetic voltage regulating soft start series
GDCQ electromagnetic voltage regulating soft start series
Overcome the current technical bottleneck of high-voltage resistance of power electronic devices, and successfully expand the low-voltage soft-starting technology to the field of high-voltage motor soft-starting, and provide users with a high-voltage motor with high cost performance, high control accuracy, high stability and high reliability. Soft start control equipment.
 FZS water loading device
FZS water loading device
Scope of application    is mainly suitable for load test of all kinds of generator sets below 10000kVA
 DGQ series (AC motor) low voltage solid state soft starter
DGQ series (AC motor) low voltage solid state soft starter
DGQ-C series intelligent soft start control device is specially designed for the start and stop of low-voltage asynchronous motors of different powers in various industries.
 GWJ series reactive power compensation cabinet
GWJ series reactive power compensation cabinet
GWJ series reactive power compensation cabinet is suitable for AC frequency 50Hz, rated voltage 10kV busbar and below power distribution system for power factor compensation, and also suitable for on-site power factor compensation of asynchronous motors, to achieve automatic power factor adjustment, reduce reactive power loss, and stabilize Grid voltage, reduce the odd harmonics of the grid, and improve the quality of power supply.
 XL-21 low voltage power distribution box series
XL-21 low voltage power distribution box series
XL-21 low-voltage power distribution box is suitable for power lighting in power plants, high-rise buildings, industrial and mining enterprises, etc. as AC 50 (60) Hz and rated working voltage below 660V power distribution system.

TOP

Dayu Electric Technology Co., Ltd

Share

Copyright: Dayu Electric Technology Co., Ltd    鄂ICP备11003701号-3    TEL:0712-2883450   Address: No. 2, Hangtian Avenue, Xiaogan, Hubei

Dayu Electric Technology Co., Ltd