DDB Low-voltage Dynamic Compensation Cabinet
DDB uses thyristor switches to control capacitor banks for low-voltage dynamic reactive-power compensation. It is intended to improve power factor and suppress voltage fluctuations as loads change.
Typical Applications
Systems: Low-voltage systems with rapidly changing loads.
Uses: Dynamic reactive-power compensation and power-factor improvement.
Product Overview
Typical Challenges

Product Features

Specifications

| Applicable Standard | JB 7113-93 |
| Applicable Standard | GB/T 15576-2008 |
| Compliance Standard | GB/T 15576-2008 General technical requirements for static reactive power compensation equipment |
| Compensation Capacity (kvar) | Configurable to user requirements |
| System Frequency | 50 Hz |
| Compensated Power Factor | ≥0.9 |
| Ambient Temperature | −30°C to +50°C |
| Cabinet Configuration | Standard GGD, GCS, GCK or MNS cabinets are available for installation alongside low-voltage distribution cabinets. Custom design and manufacture are also available to meet user requirements. |
| Protection Functions | Filtering and protection against overtemperature, overvoltage, undervoltage and harmonics. |
| Protection Rating | IP20–IP30 (depending on the type of distribution cabinet selected) |
| Residual Voltage | Below 50 V at 3 min after disconnection of the applied voltage. |
| Reactor Reactance Ratio | 4.5%–7%; 12%–14%, selected according to grid harmonic conditions |
Data Download

| Name |
Version |
format |
Size |
Date |
Download |
| DDB Low-Voltage Dynamic Compensation Cabinet | V1.0 | 1.05KB | 2026-11-11 |
ꁲ
视频播放失败,请稍后重试
相关产品


















